Professional Alderpoint Roofing Contractor. GAF Certified

We don't do shortcuts on replacements. Tear off the old roof, check the decking for soft spots, install synthetic underlayment, drip edge, starter strip, shingles, ridge vent. The whole system. Your roof is only as good as the layers underneath.

Roof repairs get worse when you ignore them. A $400 flashing repair turns into $4,000 of water damage inside the wall. Our Alderpoint crew can usually get there within 48 hours for non-emergency repairs.

Hail, wind, fallen branches. California storms do real damage to roofs. We respond within 24 hours, tarp exposed areas to prevent further damage, and start your insurance claim with a detailed inspection report.

New construction roof installation following IRC Section R905 and local Alderpoint building code amendments. We calculate ventilation per IRC R806 (1:150 ratio reduced to 1:300 when 50% is within 3ft of ridge. Synthetic underlayment per ASTM D226, ice barrier per ASTM D1970 at eaves in freeze-thaw climate zones. Manufacturer-certified installation locks in the full system warranty.

Standing seam metal roofing with Kynar 500/Hylar 5000 PVDF finish. The coating that keeps color for 40+ years without fading or chalking. We install Sheffield Metals and McElroy Metal panels in 24-gauge Galvalume steel with concealed Z-clips. UL 2218 Class 4 impact resistance. UL 790 Class A fire rating. Wind uplift tested to ASTM E1592. The only roof you'll ever need in Alderpoint.

Asphalt shingle roofing is the most common and cost-effective roofing system in Alderpoint. Our crews install 15-20 shingle roofs a month. We know the product inside and out. Nailing patterns, exposure measurements, hip and ridge details.

We repair and install flat roofs on Alderpoint homes, garages, commercial buildings, and additions. TPO for reflectivity, EPDM for budget, PVC for chemical resistance near restaurants and kitchens.

Flat roofs on commercial buildings are a different animal. We install and repair TPO, EPDM, modified bitumen, and built-up systems. Our Alderpoint commercial crew handles retail, warehouse, office, and multi-family buildings.

Gutter replacement in Alderpoint runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

Our 27-point roof inspection covers: shingle condition, granule loss, nail pops, lifting tabs, ridge cap integrity, valley flashing, step flashing at walls, drip edge, pipe boot seals, vent function, soffit ventilation, gutter pitch, downspout capacity, fascia condition, decking (from attic if accessible), and visible signs of moisture in the attic. Written report with photos emailed same day.

We keep tarps, plywood, and common repair materials on every truck. When you call (877) 586-1316 for an emergency, our crew shows up ready to work. Not ready to give you a sales pitch.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.