Anderson Roof Installation & Repair. Licensed & Insured

Replacing your roof isn't just about shingles. We install ice and water shield in the valleys and along eaves, synthetic underlayment across the whole deck, new drip edge on rake and eave, starter strip, and ridge vent. That's how a roof lasts 30 years in Alabama.

Missing shingles cause water intrusion through the exposed underlayment and decking. We don't just replace the missing shingle. We check the deck for moisture damage with a Protimeter pin meter, replace any compromised underlayment, and weave new CertainTeed Landmark shingles into the existing pattern.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Anderson inspector does a full 27-point inspection, free of charge.

A new roof installation starts with getting the specs right. Roof pitch determines your material options. Attic space determines ventilation needs. Local code determines underlayment requirements. We handle all of that before the first shingle goes on.

Metal roofing costs more upfront at $12-$22 per sq ft installed in Anderson compared to $4-$8 for shingles. But it lasts 2-3x longer and your energy bills drop 15-25%. Math works out over time.

Your shingle choice determines your warranty, your curb appeal, and how your roof handles Alabama weather. We'll show you samples, explain the differences, and let you pick what fits your budget. No pressure.

Commercial flat roof replacement in Anderson starts with a core sample to check the existing insulation. If it's waterlogged, everything comes off. If it's dry, we can sometimes overlay. Saves you $2-$4 per square foot.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Anderson commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Gutter replacement in Anderson runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

We climb up, walk the entire roof, and document what we find with photos and measurements. Takes about 30 minutes. You see exactly what we see. No mysteries, no scare tactics.

Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Anderson contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.