Barnesville, GA Roofing Contractor. Free Estimates

A roof replacement in Barnesville typically runs $8,500 to $24,000 depending on the size and pitch. We give you an exact number upfront with a written proposal. No surprises on install day.

Leak repairs in Barnesville start at $350 for a simple fix. We find the source with a water test or thermal scan, repair the damage, and warranty the work. If the repair costs more than 30% of a replacement, we'll tell you.

After a storm in Barnesville, half the roofers in town show up knocking on doors. Most of them aren't from here. We are. We've been handling storm claims in Barnesville for 15 years. We know the adjusters, we know the process.

New construction roof installation following IRC Section R905 and local Barnesville building code amendments. We calculate ventilation per IRC R806 (1:150 ratio reduced to 1:300 when 50% is within 3ft of ridge. Synthetic underlayment per ASTM D226, ice barrier per ASTM D1970 at eaves in freeze-thaw climate zones. Manufacturer-certified installation locks in the full system warranty.

Corrugated metal and R-panel are cost-effective options for barns, detached shops, and covered patios in Barnesville. We install 29-gauge and 26-gauge corrugated with exposed fasteners using neoprene washer screws. For homes, we recommend 24-gauge standing seam with concealed fasteners. Cleaner look, no exposed fastener maintenance. DaVinci composite shake and slate profiles give you the metal longevity with a traditional Georgia aesthetic.

Owens Corning Duration STORM shingles with triple-layer SureNail reinforcement strip. Rated to 130 mph wind per ASTM D7158. Algae-resistant granules prevent black streaking in humid Georgia climates. We install Duration in the full Owens Corning system for Preferred Protection or Platinum Protection warranty coverage. CertainTeed Landmark PRO with NailTrak technology is our alternative pick for Barnesville homeowners who want the max warranty tier.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Barnesville areas.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Barnesville commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

If your gutters overflow during rain, they're either clogged, undersized, or pitched wrong. Sometimes all three. We'll assess the issue and fix it. Might be a cleaning, might be a replacement.

Roof inspections after a storm are free. Always. We document hail hits, wind damage, and any pre-existing issues so your insurance claim is accurate and complete.

We keep tarps, plywood, and common repair materials on every truck. When you call (877) 586-1316 for an emergency, our crew shows up ready to work. Not ready to give you a sales pitch.

Tubular skylights bring light into tight spaces. Closets, laundry rooms, interior bathrooms. They use a reflective tube through the attic space, so they work even when the roof is far from the ceiling. Installed in a few hours.