Local Brevig Mission Roofing Experts | 23+ Years

Replacing your roof isn't just about shingles. We install ice and water shield in the valleys and along eaves, synthetic underlayment across the whole deck, new drip edge on rake and eave, starter strip, and ridge vent. That's how a roof lasts 30 years in Alaska.

Roof repairs get worse when you ignore them. A $400 flashing repair turns into $4,000 of water damage inside the wall. Our Brevig Mission crew can usually get there within 48 hours for non-emergency repairs.

Wind speeds over 60 mph cause shingle tab lift and seal failure. Hail over 1" diameter causes fractures through the shingle mat to the fiberglass reinforcement. Our HAAG-trained inspectors know the difference between cosmetic damage and functional damage. That distinction determines your insurance payout.

Building a new home in Brevig Mission? Our crew works directly with your GC or we self-perform. We handle everything from the decking up: underlayment, ventilation design, material installation, and final inspection.

We install 24-gauge and 26-gauge standing seam in Galvalume and pre-painted steel. Concealed fastener system means nothing's exposed to weather. Panels lock together at the seam and clip to the roof deck.

Owens Corning Duration STORM shingles with triple-layer SureNail reinforcement strip. Rated to 130 mph wind per ASTM D7158. Algae-resistant granules prevent black streaking in humid Alaska climates. We install Duration in the full Owens Corning system for Preferred Protection or Platinum Protection warranty coverage. CertainTeed Landmark PRO with NailTrak technology is our alternative pick for Brevig Mission homeowners who want the max warranty tier.

Commercial flat roof replacement in Brevig Mission starts with a core sample to check the existing insulation. If it's waterlogged, everything comes off. If it's dry, we can sometimes overlay. Saves you $2-$4 per square foot.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Brevig Mission commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Half-round copper gutters with round downspouts. That's the premium install. We solder joints on-site using 50/50 tin-lead solder. Copper develops a natural patina in Alaska's climate within 5-7 years. For aluminum, we use Spectra Metals .027 gauge seamless with Raytec hidden hangers rated to hold 25 lbs per linear foot of ice and debris load.

Infrared moisture scanning available for Brevig Mission commercial and flat roof inspections. Thermal imaging locates trapped moisture in the insulation layer without cutting core samples. We use Flir E8 cameras to map wet areas, then core sample only the suspect zones to confirm. Saves time, reduces disruption, and gives you a precise repair scope instead of a guess.

After we tarp and secure your roof, we document everything for insurance purposes. Photos, measurements, damage descriptions. Your adjuster gets a professional report, not a handwritten note.

Skylight installation costs $1,200-$3,500 in Brevig Mission depending on size, type, and roof pitch. That includes the unit, flashing kit, interior trim, and roof patch-in. We handle everything from the outside in.