Trusted Briggs Roofing Contractor. Free Estimates

Our Briggs crews tear off and replace 15-20 roofs a month. That kind of volume means tight installs, clean job sites, and no wasted time. Most homes are done in a day. Two-story steep-pitch jobs take two.

Step flashing at chimney walls is the number one leak source we see in Briggs. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Briggs inspector does a full 27-point inspection, free of charge.

We install new roofs on new construction, room additions, detached garages, and covered patios. Our Briggs crews handle residential and light commercial. Standard install time is 1-3 days depending on size.

Standing seam metal roofing with Kynar 500/Hylar 5000 PVDF finish. The coating that keeps color for 40+ years without fading or chalking. We install Sheffield Metals and McElroy Metal panels in 24-gauge Galvalume steel with concealed Z-clips. UL 2218 Class 4 impact resistance. UL 790 Class A fire rating. Wind uplift tested to ASTM E1592. The only roof you'll ever need in Briggs.

GAF Timberline HDZ architectural shingles with StrikeZone nailing area. The highest-selling shingle in North America. Impact-rated to UL 2218 Class 4 when installed with the full GAF Roof System. Our Briggs crews install Timberline in the full system configuration to qualify for Golden Pledge warranty. ASTM D3462 and D7158 Class H certified.

Flat roofs need special attention. Water doesn't run off, it sits. We install TPO, PVC, EPDM, and modified bitumen systems designed to handle ponding water in Texas's climate.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Briggs commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Clogged gutters cause fascia rot. We see it on every other house in Briggs. We install new gutters with proper pitch, adequate downspout capacity, and optional gutter guards if you're done cleaning them twice a year.

We climb up, walk the entire roof, and document what we find with photos and measurements. Takes about 30 minutes. You see exactly what we see. No mysteries, no scare tactics.

After we tarp and secure your roof, we document everything for insurance purposes. Photos, measurements, damage descriptions. Your adjuster gets a professional report, not a handwritten note.

Vented skylights open to let hot air escape. Great for kitchens and bathrooms in Briggs. Fixed skylights are cheaper and simpler. Solar-powered options from VELUX qualify for the federal 30% tax credit through 2032.