Browder, KY Roofing Contractor. Licensed & Insured

Full tear-off down to the decking, inspect every board, replace what's rotten, and install a complete roofing system from ice and water shield up. Most residential jobs finished in 1-2 days.

Leak repairs in Browder start at $350 for a simple fix. We find the source with a water test or thermal scan, repair the damage, and warranty the work. If the repair costs more than 30% of a replacement, we'll tell you.

Wind speeds over 60 mph cause shingle tab lift and seal failure. Hail over 1" diameter causes fractures through the shingle mat to the fiberglass reinforcement. Our HAAG-trained inspectors know the difference between cosmetic damage and functional damage. That distinction determines your insurance payout.

A new roof installation starts with getting the specs right. Roof pitch determines your material options. Attic space determines ventilation needs. Local code determines underlayment requirements. We handle all of that before the first shingle goes on.

We do metal roof repairs too. Loose panels, failed sealant at transitions, rust spots on older galvanized. Not every metal issue needs a full replacement. Our Browder crew can usually fix it same-day.

GAF Timberline HDZ architectural shingles with StrikeZone nailing area. The highest-selling shingle in North America. Impact-rated to UL 2218 Class 4 when installed with the full GAF Roof System. Our Browder crews install Timberline in the full system configuration to qualify for Golden Pledge warranty. ASTM D3462 and D7158 Class H certified.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Browder areas.

Flat roofs on commercial buildings are a different animal. We install and repair TPO, EPDM, modified bitumen, and built-up systems. Our Browder commercial crew handles retail, warehouse, office, and multi-family buildings.

Gutter replacement in Browder runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

Annual roof inspections catch small problems before they become expensive ones. A cracked pipe boot is a $150 fix. Ignoring it means $3,000 in ceiling and wall water damage. We recommend an inspection every 2-3 years for roofs under 10 years old, and annually after that.

After we tarp and secure your roof, we document everything for insurance purposes. Photos, measurements, damage descriptions. Your adjuster gets a professional report, not a handwritten note.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.