Dauphin Area Roof Repair & Replacement. GAF Certified

Our Dauphin crews tear off and replace 15-20 roofs a month. That kind of volume means tight installs, clean job sites, and no wasted time. Most homes are done in a day. Two-story steep-pitch jobs take two.

We repair every type of roofing. Asphalt shingles, metal panels, flat membranes, tile. Our guys carry the materials on the truck. Most repairs are same-day once we're on site.

Our storm damage process: free inspection, full photo documentation, direct filing with your insurance carrier, meet the adjuster on-site, and handle the repairs once approved. We don't ask for money upfront on insurance claims.

We price new installs by the roofing square (100 sq ft). Architectural shingles in Dauphin typically run $350-$550 per square installed, depending on the pitch and access. That includes materials, labor, cleanup, and warranty registration.

Standing seam metal lasts 40-60 years with practically zero maintenance. Higher upfront cost than shingles, but you'll never replace it again. Our Dauphin metal crews do residential and commercial.

Asphalt shingle roofing is the most common and cost-effective roofing system in Dauphin. Our crews install 15-20 shingle roofs a month. We know the product inside and out. Nailing patterns, exposure measurements, hip and ridge details.

Modified bitumen is our go-to for residential flat roofs in Dauphin. Two-ply torch-applied system with a granulated cap sheet. It handles foot traffic, thermal cycling, and Pennsylvania UV better than single-ply at the residential scale.

TPO is our most-requested commercial membrane in Pennsylvania. Reflective, energy-efficient, and it welds together at the seams for a watertight bond. We install 60-mil and 80-mil systems with 15-20 year manufacturer warranties.

Half-round copper gutters with round downspouts. That's the premium install. We solder joints on-site using 50/50 tin-lead solder. Copper develops a natural patina in Pennsylvania's climate within 5-7 years. For aluminum, we use Spectra Metals .027 gauge seamless with Raytec hidden hangers rated to hold 25 lbs per linear foot of ice and debris load.

Our 27-point roof inspection covers: shingle condition, granule loss, nail pops, lifting tabs, ridge cap integrity, valley flashing, step flashing at walls, drip edge, pipe boot seals, vent function, soffit ventilation, gutter pitch, downspout capacity, fascia condition, decking (from attic if accessible), and visible signs of moisture in the attic. Written report with photos emailed same day.

Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Dauphin contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.