Trusted Edna Roofing Contractor. Licensed & Insured

We don't do shortcuts on replacements. Tear off the old roof, check the decking for soft spots, install synthetic underlayment, drip edge, starter strip, shingles, ridge vent. The whole system. Your roof is only as good as the layers underneath.

Step flashing at chimney walls is the number one leak source we see in Edna. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Wind speeds over 60 mph cause shingle tab lift and seal failure. Hail over 1" diameter causes fractures through the shingle mat to the fiberglass reinforcement. Our HAAG-trained inspectors know the difference between cosmetic damage and functional damage. That distinction determines your insurance payout.

Building a new home in Edna? Our crew works directly with your GC or we self-perform. We handle everything from the decking up: underlayment, ventilation design, material installation, and final inspection.

Metal roofing costs more upfront at $12-$22 per sq ft installed in Edna compared to $4-$8 for shingles. But it lasts 2-3x longer and your energy bills drop 15-25%. Math works out over time.

Your shingle choice determines your warranty, your curb appeal, and how your roof handles Kansas weather. We'll show you samples, explain the differences, and let you pick what fits your budget. No pressure.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Edna areas.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Edna commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

We install 5" and 6" seamless aluminum gutters in Edna. Standard homes get 5", high-volume areas and steeper pitches get 6". Downspouts every 30-40 ft of gutter run with splash blocks or underground drains.

Buying a home in Edna? Get an independent roof inspection before you close. Home inspectors look at the roof from the ground with binoculars. We get on it. Big difference.

Tree through the roof at 2 AM? Active leak flooding your kitchen? Call (877) 586-1316. We answer after hours for emergencies. Our Edna emergency crew can be on-site within hours.

Tubular skylights bring light into tight spaces. Closets, laundry rooms, interior bathrooms. They use a reflective tube through the attic space, so they work even when the roof is far from the ceiling. Installed in a few hours.