Local Fort Benton Roof Installation & Repair

We don't do shortcuts on replacements. Tear off the old roof, check the decking for soft spots, install synthetic underlayment, drip edge, starter strip, shingles, ridge vent. The whole system. Your roof is only as good as the layers underneath.

Step flashing at chimney walls is the number one leak source we see in Fort Benton. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Storm damage claims in Montana have a 1-year filing window with most carriers. Don't wait. We'll inspect your roof, document the damage, and help you file before the deadline. If there's no damage, we'll tell you that too.

New construction roof installation following IRC Section R905 and local Fort Benton building code amendments. We calculate ventilation per IRC R806 (1:150 ratio reduced to 1:300 when 50% is within 3ft of ridge. Synthetic underlayment per ASTM D226, ice barrier per ASTM D1970 at eaves in freeze-thaw climate zones. Manufacturer-certified installation locks in the full system warranty.

Standing seam metal roofing with Kynar 500/Hylar 5000 PVDF finish. The coating that keeps color for 40+ years without fading or chalking. We install Sheffield Metals and McElroy Metal panels in 24-gauge Galvalume steel with concealed Z-clips. UL 2218 Class 4 impact resistance. UL 790 Class A fire rating. Wind uplift tested to ASTM E1592. The only roof you'll ever need in Fort Benton.

Architectural shingles are what 80% of Fort Benton homeowners choose. They look better than 3-tab, last longer, and handle wind better. We install GAF Timberline, Owens Corning Duration, and CertainTeed Landmark.

Flat roofs need special attention. Water doesn't run off, it sits. We install TPO, PVC, EPDM, and modified bitumen systems designed to handle ponding water in Montana's climate.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Fort Benton commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Gutter replacement in Fort Benton runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

Our Fort Benton roof inspections cover shingles, flashing, pipe boots, ridge vent, soffit, gutters, and decking condition. You get a written report with photos. If nothing's wrong, we tell you that.

Emergency tarping is the first priority. We cover the exposed area to stop water entry, then schedule the permanent repair once conditions allow. We don't charge extra for emergency tarp jobs. It's part of the repair cost.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.