Fort Howard Area Roof Repair & Replacement. Free Estimates

Replacing your roof isn't just about shingles. We install ice and water shield in the valleys and along eaves, synthetic underlayment across the whole deck, new drip edge on rake and eave, starter strip, and ridge vent. That's how a roof lasts 30 years in Maryland.

Leak repairs in Fort Howard start at $350 for a simple fix. We find the source with a water test or thermal scan, repair the damage, and warranty the work. If the repair costs more than 30% of a replacement, we'll tell you.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Fort Howard inspector does a full 27-point inspection, free of charge.

Atlas Pinnacle Pristine shingles with Scotchgard algae protection. Ideal for Maryland humidity. We also install Tamko Heritage laminated shingles for budget-conscious builds and Malarkey Vista AR with Flexor SBS polymer-modified asphalt for high-wind zones. Your installer should match your material choice to your climate, not just your budget.

Metal roofing costs more upfront at $12-$22 per sq ft installed in Fort Howard compared to $4-$8 for shingles. But it lasts 2-3x longer and your energy bills drop 15-25%. Math works out over time.

Designer shingles like GAF Camelot and Owens Corning Berkshire mimic slate and cedar shake. Higher cost than standard architectural, but the look is incredible. We install all designer profiles in Fort Howard.

Flat roof leaks usually happen at penetrations, seams, or flashing details. We locate the source, repair it properly, and coat the surrounding area. If the membrane is shot, we'll recommend replacement. Not a band-aid.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Fort Howard commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Gutter replacement in Fort Howard runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

Infrared moisture scanning available for Fort Howard commercial and flat roof inspections. Thermal imaging locates trapped moisture in the insulation layer without cutting core samples. We use Flir E8 cameras to map wet areas, then core sample only the suspect zones to confirm. Saves time, reduces disruption, and gives you a precise repair scope instead of a guess.

We keep tarps, plywood, and common repair materials on every truck. When you call (877) 586-1316 for an emergency, our crew shows up ready to work. Not ready to give you a sales pitch.

Skylight installation costs $1,200-$3,500 in Fort Howard depending on size, type, and roof pitch. That includes the unit, flashing kit, interior trim, and roof patch-in. We handle everything from the outside in.