Fort Rucker, AL Roofing Contractor. Licensed & Insured

We don't do shortcuts on replacements. Tear off the old roof, check the decking for soft spots, install synthetic underlayment, drip edge, starter strip, shingles, ridge vent. The whole system. Your roof is only as good as the layers underneath.

Step flashing at chimney walls is the number one leak source we see in Fort Rucker. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Our storm damage process: free inspection, full photo documentation, direct filing with your insurance carrier, meet the adjuster on-site, and handle the repairs once approved. We don't ask for money upfront on insurance claims.

Atlas Pinnacle Pristine shingles with Scotchgard algae protection. Ideal for Alabama humidity. We also install Tamko Heritage laminated shingles for budget-conscious builds and Malarkey Vista AR with Flexor SBS polymer-modified asphalt for high-wind zones. Your installer should match your material choice to your climate, not just your budget.

Standing seam metal roofing with Kynar 500/Hylar 5000 PVDF finish. The coating that keeps color for 40+ years without fading or chalking. We install Sheffield Metals and McElroy Metal panels in 24-gauge Galvalume steel with concealed Z-clips. UL 2218 Class 4 impact resistance. UL 790 Class A fire rating. Wind uplift tested to ASTM E1592. The only roof you'll ever need in Fort Rucker.

GAF Timberline HDZ architectural shingles with StrikeZone nailing area. The highest-selling shingle in North America. Impact-rated to UL 2218 Class 4 when installed with the full GAF Roof System. Our Fort Rucker crews install Timberline in the full system configuration to qualify for Golden Pledge warranty. ASTM D3462 and D7158 Class H certified.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Fort Rucker areas.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Fort Rucker commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

If your gutters overflow during rain, they're either clogged, undersized, or pitched wrong. Sometimes all three. We'll assess the issue and fix it. Might be a cleaning, might be a replacement.

Buying a home in Fort Rucker? Get an independent roof inspection before you close. Home inspectors look at the roof from the ground with binoculars. We get on it. Big difference.

Storm damage, fallen trees, sudden leaks. We handle all roofing emergencies in Fort Rucker. First we stop the water, then we fix the cause. Emergency response available 7 days a week.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.