Grammer, IN Roofing Contractor | Call (877) 586-1316

GAF Timberline HDZ shingles with StrikeZone nailing area for Class 4 impact resistance rated to UL 2218. We install the full GAF Roof System. Cobra ridge vent, FeltBuster synthetic underlayment, Starter Match starter strip, and Seal-A-Ridge caps. That qualifies your Grammer home for the Golden Pledge warranty: 25-year workmanship plus 50-year material.

Step flashing at chimney walls is the number one leak source we see in Grammer. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Grammer inspector does a full 27-point inspection, free of charge.

We install new roofs on new construction, room additions, detached garages, and covered patios. Our Grammer crews handle residential and light commercial. Standard install time is 1-3 days depending on size.

Metal roofing in Indiana makes sense. It reflects heat, handles high winds, and sheds hail better than shingles. We install standing seam, corrugated, and metal shingle panels.

Three-tab shingles are cheaper upfront but they don't hold up like architectural. We recommend them for sheds, detached garages, and rental properties where budget matters more than aesthetics. For your Grammer home? Go architectural.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Grammer areas.

Flat roofs on commercial buildings are a different animal. We install and repair TPO, EPDM, modified bitumen, and built-up systems. Our Grammer commercial crew handles retail, warehouse, office, and multi-family buildings.

We offer aluminum, copper, and steel gutters for Grammer homes. Most folks go with .027 gauge seamless aluminum. It's durable, affordable, and comes in 25+ colors. Copper looks amazing but costs 3-4x more.

Annual roof inspections catch small problems before they become expensive ones. A cracked pipe boot is a $150 fix. Ignoring it means $3,000 in ceiling and wall water damage. We recommend an inspection every 2-3 years for roofs under 10 years old, and annually after that.

Emergency tarping is the first priority. We cover the exposed area to stop water entry, then schedule the permanent repair once conditions allow. We don't charge extra for emergency tarp jobs. It's part of the repair cost.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.