Hillrose Roofing Contractor

GAF Timberline HDZ shingles with StrikeZone nailing area for Class 4 impact resistance rated to UL 2218. We install the full GAF Roof System. Cobra ridge vent, FeltBuster synthetic underlayment, Starter Match starter strip, and Seal-A-Ridge caps. That qualifies your Hillrose home for the Golden Pledge warranty: 25-year workmanship plus 50-year material.

Step flashing at chimney walls is the number one leak source we see in Hillrose. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Our storm damage process: free inspection, full photo documentation, direct filing with your insurance carrier, meet the adjuster on-site, and handle the repairs once approved. We don't ask for money upfront on insurance claims.

New construction roof installation following IRC Section R905 and local Hillrose building code amendments. We calculate ventilation per IRC R806 (1:150 ratio reduced to 1:300 when 50% is within 3ft of ridge. Synthetic underlayment per ASTM D226, ice barrier per ASTM D1970 at eaves in freeze-thaw climate zones. Manufacturer-certified installation locks in the full system warranty.

Standing seam metal lasts 40-60 years with practically zero maintenance. Higher upfront cost than shingles, but you'll never replace it again. Our Hillrose metal crews do residential and commercial.

Three-tab shingles are cheaper upfront but they don't hold up like architectural. We recommend them for sheds, detached garages, and rental properties where budget matters more than aesthetics. For your Hillrose home? Go architectural.

Flat roofs need special attention. Water doesn't run off, it sits. We install TPO, PVC, EPDM, and modified bitumen systems designed to handle ponding water in Colorado's climate.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Hillrose commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

We install 5" and 6" seamless aluminum gutters in Hillrose. Standard homes get 5", high-volume areas and steeper pitches get 6". Downspouts every 30-40 ft of gutter run with splash blocks or underground drains.

Infrared moisture scanning available for Hillrose commercial and flat roof inspections. Thermal imaging locates trapped moisture in the insulation layer without cutting core samples. We use Flir E8 cameras to map wet areas, then core sample only the suspect zones to confirm. Saves time, reduces disruption, and gives you a precise repair scope instead of a guess.

Emergency roof repairs for active water intrusion follow a strict protocol: tarping with reinforced polyethylene sheeting secured to the roof deck, interior water extraction guidance, and temporary flashing at penetrations. Our Hillrose emergency crews carry 20x30 tarps, 2x4 nailer boards, and masonry anchors for various deck types. Permanent repairs are scheduled within 48-72 hours once materials are sourced.

VELUX FS fixed skylights and VS vented skylights installed with EDL flashing kits for profile roofing. The flashing integrates with your shingle courses per IRC R903.2 weather protection requirements. We cut the opening, frame the curb with doubled 2x lumber, install the skylight with factory sealant, and weave the flashing into the existing shingle field. Leak-proof when done right. And we do it right in Hillrose.