Industry Roofing Contractor. Free Estimates

We don't do shortcuts on replacements. Tear off the old roof, check the decking for soft spots, install synthetic underlayment, drip edge, starter strip, shingles, ridge vent. The whole system. Your roof is only as good as the layers underneath.

After we fix your roof, we send you before-and-after photos and a written warranty. If it leaks again from the same spot within 5 years, we come back free. That's the deal.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Industry inspector does a full 27-point inspection, free of charge.

Building a new home in Industry? Our crew works directly with your GC or we self-perform. We handle everything from the decking up: underlayment, ventilation design, material installation, and final inspection.

Metal roofing costs more upfront at $12-$22 per sq ft installed in Industry compared to $4-$8 for shingles. But it lasts 2-3x longer and your energy bills drop 15-25%. Math works out over time.

Owens Corning Duration STORM shingles with triple-layer SureNail reinforcement strip. Rated to 130 mph wind per ASTM D7158. Algae-resistant granules prevent black streaking in humid Illinois climates. We install Duration in the full Owens Corning system for Preferred Protection or Platinum Protection warranty coverage. CertainTeed Landmark PRO with NailTrak technology is our alternative pick for Industry homeowners who want the max warranty tier.

Flat roofs need special attention. Water doesn't run off, it sits. We install TPO, PVC, EPDM, and modified bitumen systems designed to handle ponding water in Illinois's climate.

Modified bitumen (mod-bit) is still the best choice for high-traffic commercial roofs in Industry. We torch-apply SBS-modified base and cap sheets over properly primed concrete or approved decking. Two-ply mod-bit systems carry 20-year NDL (No Dollar Limit) warranties through GAF, Firestone, or Johns Manville. NRCA member. We follow the manual.

We install 5" and 6" seamless aluminum gutters in Industry. Standard homes get 5", high-volume areas and steeper pitches get 6". Downspouts every 30-40 ft of gutter run with splash blocks or underground drains.

Buying a home in Industry? Get an independent roof inspection before you close. Home inspectors look at the roof from the ground with binoculars. We get on it. Big difference.

Most emergency roof repairs in Industry are storm-related. High winds rip off ridge caps and shingles. Fallen limbs puncture the decking. We respond fast, tarp the damage, and coordinate the permanent fix. Including insurance paperwork if applicable.

VELUX FS fixed skylights and VS vented skylights installed with EDL flashing kits for profile roofing. The flashing integrates with your shingle courses per IRC R903.2 weather protection requirements. We cut the opening, frame the curb with doubled 2x lumber, install the skylight with factory sealant, and weave the flashing into the existing shingle field. Leak-proof when done right. And we do it right in Industry.