Keene Valley, NY Roofing Contractor. GAF Certified

A roof replacement in Keene Valley typically runs $8,500 to $24,000 depending on the size and pitch. We give you an exact number upfront with a written proposal. No surprises on install day.

Leak repairs in Keene Valley start at $350 for a simple fix. We find the source with a water test or thermal scan, repair the damage, and warranty the work. If the repair costs more than 30% of a replacement, we'll tell you.

HAAG Certified Inspector on every storm claim we handle in Keene Valley. HAAG certification is the insurance industry standard for forensic roof inspection. Adjusters trust our reports. We document hail hits per square, wind creasing, and granule displacement. FM 4473 hail resistance ratings determine whether your roof qualifies for full replacement or spot repair.

New construction or an addition? We install new roofing systems from scratch. Decking inspection, ice and water shield, synthetic underlayment, ventilation calculations, and whatever material you want on top. Shingles, metal, or flat.

We do metal roof repairs too. Loose panels, failed sealant at transitions, rust spots on older galvanized. Not every metal issue needs a full replacement. Our Keene Valley crew can usually fix it same-day.

Three-tab shingles are cheaper upfront but they don't hold up like architectural. We recommend them for sheds, detached garages, and rental properties where budget matters more than aesthetics. For your Keene Valley home? Go architectural.

Flat roofs need special attention. Water doesn't run off, it sits. We install TPO, PVC, EPDM, and modified bitumen systems designed to handle ponding water in New York's climate.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Keene Valley commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Improperly sized gutters cause fascia board rot and foundation erosion. We calculate gutter capacity using the rainfall intensity formula: roof square footage x pitch factor x rainfall rate (inches/hr for Keene Valley). Standard 5" K-style handles 5,520 sq ft of effective roof area. Bigger roofs or steeper pitches need 6" gutters with 3x4" downspouts. We hang with hidden hangers screwed into rafter tails every 24".

Roof inspections after a storm are free. Always. We document hail hits, wind damage, and any pre-existing issues so your insurance claim is accurate and complete.

Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Keene Valley contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.

Skylight replacement is often better than repair on units over 15 years old. VELUX FCM curb-mount replacement skylights install on the existing curb frame. No structural modification needed. Low-E laminated glass with argon fill for energy efficiency. Solar-powered blinds available for light control. VELUX No Leak guarantee when installed with the complete flashing system. Your Keene Valley home gets more light, better insulation, and a proper warranty.