Kings Mills, OH Roofing Contractor. Free Estimates

We don't do shortcuts on replacements. Tear off the old roof, check the decking for soft spots, install synthetic underlayment, drip edge, starter strip, shingles, ridge vent. The whole system. Your roof is only as good as the layers underneath.

Step flashing at chimney walls is the number one leak source we see in Kings Mills. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Storm damage claims in Ohio have a 1-year filing window with most carriers. Don't wait. We'll inspect your roof, document the damage, and help you file before the deadline. If there's no damage, we'll tell you that too.

Atlas Pinnacle Pristine shingles with Scotchgard algae protection. Ideal for Ohio humidity. We also install Tamko Heritage laminated shingles for budget-conscious builds and Malarkey Vista AR with Flexor SBS polymer-modified asphalt for high-wind zones. Your installer should match your material choice to your climate, not just your budget.

Corrugated metal and R-panel are cost-effective options for barns, detached shops, and covered patios in Kings Mills. We install 29-gauge and 26-gauge corrugated with exposed fasteners using neoprene washer screws. For homes, we recommend 24-gauge standing seam with concealed fasteners. Cleaner look, no exposed fastener maintenance. DaVinci composite shake and slate profiles give you the metal longevity with a traditional Ohio aesthetic.

Your shingle choice determines your warranty, your curb appeal, and how your roof handles Ohio weather. We'll show you samples, explain the differences, and let you pick what fits your budget. No pressure.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Kings Mills areas.

Modified bitumen (mod-bit) is still the best choice for high-traffic commercial roofs in Kings Mills. We torch-apply SBS-modified base and cap sheets over properly primed concrete or approved decking. Two-ply mod-bit systems carry 20-year NDL (No Dollar Limit) warranties through GAF, Firestone, or Johns Manville. NRCA member. We follow the manual.

If your gutters overflow during rain, they're either clogged, undersized, or pitched wrong. Sometimes all three. We'll assess the issue and fix it. Might be a cleaning, might be a replacement.

Buying a home in Kings Mills? Get an independent roof inspection before you close. Home inspectors look at the roof from the ground with binoculars. We get on it. Big difference.

Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Kings Mills contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.

Skylight installation costs $1,200-$3,500 in Kings Mills depending on size, type, and roof pitch. That includes the unit, flashing kit, interior trim, and roof patch-in. We handle everything from the outside in.