Trusted Kinross Roofing Contractor

A roof replacement in Kinross typically runs $8,500 to $24,000 depending on the size and pitch. We give you an exact number upfront with a written proposal. No surprises on install day.

Step flashing at chimney walls is the number one leak source we see in Kinross. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Kinross inspector does a full 27-point inspection, free of charge.

We price new installs by the roofing square (100 sq ft). Architectural shingles in Kinross typically run $350-$550 per square installed, depending on the pitch and access. That includes materials, labor, cleanup, and warranty registration.

Metal roofing costs more upfront at $12-$22 per sq ft installed in Kinross compared to $4-$8 for shingles. But it lasts 2-3x longer and your energy bills drop 15-25%. Math works out over time.

We install asphalt shingles from every major manufacturer. GAF, Owens Corning, CertainTeed, Atlas, Tamko, Malarkey, IKO. Each has different warranty tiers and price points. We walk you through the comparison without pushing one brand.

Modified bitumen is our go-to for residential flat roofs in Kinross. Two-ply torch-applied system with a granulated cap sheet. It handles foot traffic, thermal cycling, and Michigan UV better than single-ply at the residential scale.

Modified bitumen (mod-bit) is still the best choice for high-traffic commercial roofs in Kinross. We torch-apply SBS-modified base and cap sheets over properly primed concrete or approved decking. Two-ply mod-bit systems carry 20-year NDL (No Dollar Limit) warranties through GAF, Firestone, or Johns Manville. NRCA member. We follow the manual.

We offer aluminum, copper, and steel gutters for Kinross homes. Most folks go with .027 gauge seamless aluminum. It's durable, affordable, and comes in 25+ colors. Copper looks amazing but costs 3-4x more.

Our 27-point roof inspection covers: shingle condition, granule loss, nail pops, lifting tabs, ridge cap integrity, valley flashing, step flashing at walls, drip edge, pipe boot seals, vent function, soffit ventilation, gutter pitch, downspout capacity, fascia condition, decking (from attic if accessible), and visible signs of moisture in the attic. Written report with photos emailed same day.

Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Kinross contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.

Skylight installation costs $1,200-$3,500 in Kinross depending on size, type, and roof pitch. That includes the unit, flashing kit, interior trim, and roof patch-in. We handle everything from the outside in.