Local Lake Arrowhead Roof Installation & Repair | 21+ Years

Full tear-off down to the decking, inspect every board, replace what's rotten, and install a complete roofing system from ice and water shield up. Most residential jobs finished in 1-2 days.

Leak repairs in Lake Arrowhead start at $350 for a simple fix. We find the source with a water test or thermal scan, repair the damage, and warranty the work. If the repair costs more than 30% of a replacement, we'll tell you.

Wind speeds over 60 mph cause shingle tab lift and seal failure. Hail over 1" diameter causes fractures through the shingle mat to the fiberglass reinforcement. Our HAAG-trained inspectors know the difference between cosmetic damage and functional damage. That distinction determines your insurance payout.

New roof installation on new construction means getting the ventilation right from the start. We calculate intake and exhaust requirements based on attic square footage and install the right combination of soffit vents and ridge vent. Saves you money on cooling bills in California.

Corrugated metal and R-panel are cost-effective options for barns, detached shops, and covered patios in Lake Arrowhead. We install 29-gauge and 26-gauge corrugated with exposed fasteners using neoprene washer screws. For homes, we recommend 24-gauge standing seam with concealed fasteners. Cleaner look, no exposed fastener maintenance. DaVinci composite shake and slate profiles give you the metal longevity with a traditional California aesthetic.

Three-tab shingles are cheaper upfront but they don't hold up like architectural. We recommend them for sheds, detached garages, and rental properties where budget matters more than aesthetics. For your Lake Arrowhead home? Go architectural.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Lake Arrowhead areas.

TPO is our most-requested commercial membrane in California. Reflective, energy-efficient, and it welds together at the seams for a watertight bond. We install 60-mil and 80-mil systems with 15-20 year manufacturer warranties.

Half-round copper gutters with round downspouts. That's the premium install. We solder joints on-site using 50/50 tin-lead solder. Copper develops a natural patina in California's climate within 5-7 years. For aluminum, we use Spectra Metals .027 gauge seamless with Raytec hidden hangers rated to hold 25 lbs per linear foot of ice and debris load.

Our 27-point roof inspection covers: shingle condition, granule loss, nail pops, lifting tabs, ridge cap integrity, valley flashing, step flashing at walls, drip edge, pipe boot seals, vent function, soffit ventilation, gutter pitch, downspout capacity, fascia condition, decking (from attic if accessible), and visible signs of moisture in the attic. Written report with photos emailed same day.

Emergency roof repairs for active water intrusion follow a strict protocol: tarping with reinforced polyethylene sheeting secured to the roof deck, interior water extraction guidance, and temporary flashing at penetrations. Our Lake Arrowhead emergency crews carry 20x30 tarps, 2x4 nailer boards, and masonry anchors for various deck types. Permanent repairs are scheduled within 48-72 hours once materials are sourced.

VELUX FS fixed skylights and VS vented skylights installed with EDL flashing kits for profile roofing. The flashing integrates with your shingle courses per IRC R903.2 weather protection requirements. We cut the opening, frame the curb with doubled 2x lumber, install the skylight with factory sealant, and weave the flashing into the existing shingle field. Leak-proof when done right. And we do it right in Lake Arrowhead.