Local Lyford Roofing Contractor

Owens Corning Duration shingles with SureNail technology rated to ASTM D3462 and D7158 Class H wind resistance. Our Lyford crews install TruDefinition Duration in a full Owens Corning system. ProArmor synthetic underlayment, VentSure ridge vent, and Starter+ starter strip. Preferred Protection warranty included.

Step flashing at chimney walls is the number one leak source we see in Lyford. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Lyford inspector does a full 27-point inspection, free of charge.

We install new roofs on new construction, room additions, detached garages, and covered patios. Our Lyford crews handle residential and light commercial. Standard install time is 1-3 days depending on size.

Corrugated metal and R-panel are cost-effective options for barns, detached shops, and covered patios in Lyford. We install 29-gauge and 26-gauge corrugated with exposed fasteners using neoprene washer screws. For homes, we recommend 24-gauge standing seam with concealed fasteners. Cleaner look, no exposed fastener maintenance. DaVinci composite shake and slate profiles give you the metal longevity with a traditional Texas aesthetic.

Owens Corning Duration STORM shingles with triple-layer SureNail reinforcement strip. Rated to 130 mph wind per ASTM D7158. Algae-resistant granules prevent black streaking in humid Texas climates. We install Duration in the full Owens Corning system for Preferred Protection or Platinum Protection warranty coverage. CertainTeed Landmark PRO with NailTrak technology is our alternative pick for Lyford homeowners who want the max warranty tier.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Lyford areas.

Our Lyford commercial crews handle everything from small retail strip centers to 50,000 sq ft warehouses. TPO, EPDM, modified bitumen, metal. We're certified installers for all major commercial membrane systems.

Half-round copper gutters with round downspouts. That's the premium install. We solder joints on-site using 50/50 tin-lead solder. Copper develops a natural patina in Texas's climate within 5-7 years. For aluminum, we use Spectra Metals .027 gauge seamless with Raytec hidden hangers rated to hold 25 lbs per linear foot of ice and debris load.

Roof inspections after a storm are free. Always. We document hail hits, wind damage, and any pre-existing issues so your insurance claim is accurate and complete.

Emergency roof repairs for active water intrusion follow a strict protocol: tarping with reinforced polyethylene sheeting secured to the roof deck, interior water extraction guidance, and temporary flashing at penetrations. Our Lyford emergency crews carry 20x30 tarps, 2x4 nailer boards, and masonry anchors for various deck types. Permanent repairs are scheduled within 48-72 hours once materials are sourced.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.