Mellette Roof Installation & Repair. Free Estimates

A roof replacement in Mellette typically runs $8,500 to $24,000 depending on the size and pitch. We give you an exact number upfront with a written proposal. No surprises on install day.

Not every problem needs a full replacement. Sometimes it's a blown-off shingle, a cracked pipe boot, or deteriorated valley flashing. We diagnose the actual issue and fix that. We don't upsell you into a new roof you don't need.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Mellette inspector does a full 27-point inspection, free of charge.

A new roof installation starts with getting the specs right. Roof pitch determines your material options. Attic space determines ventilation needs. Local code determines underlayment requirements. We handle all of that before the first shingle goes on.

Corrugated metal and R-panel are cost-effective options for barns, detached shops, and covered patios in Mellette. We install 29-gauge and 26-gauge corrugated with exposed fasteners using neoprene washer screws. For homes, we recommend 24-gauge standing seam with concealed fasteners. Cleaner look, no exposed fastener maintenance. DaVinci composite shake and slate profiles give you the metal longevity with a traditional South Dakota aesthetic.

Owens Corning Duration STORM shingles with triple-layer SureNail reinforcement strip. Rated to 130 mph wind per ASTM D7158. Algae-resistant granules prevent black streaking in humid South Dakota climates. We install Duration in the full Owens Corning system for Preferred Protection or Platinum Protection warranty coverage. CertainTeed Landmark PRO with NailTrak technology is our alternative pick for Mellette homeowners who want the max warranty tier.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Mellette areas.

TPO is our most-requested commercial membrane in South Dakota. Reflective, energy-efficient, and it welds together at the seams for a watertight bond. We install 60-mil and 80-mil systems with 15-20 year manufacturer warranties.

Gutters aren't glamorous, but they're protecting your foundation, your fascia, and your landscaping. We install seamless aluminum gutters custom-formed on-site from a roll of coil stock. No seams means no leaks.

Our Mellette roof inspections cover shingles, flashing, pipe boots, ridge vent, soffit, gutters, and decking condition. You get a written report with photos. If nothing's wrong, we tell you that.

Emergency roof repairs for active water intrusion follow a strict protocol: tarping with reinforced polyethylene sheeting secured to the roof deck, interior water extraction guidance, and temporary flashing at penetrations. Our Mellette emergency crews carry 20x30 tarps, 2x4 nailer boards, and masonry anchors for various deck types. Permanent repairs are scheduled within 48-72 hours once materials are sourced.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.