Mills Roof Installation & Repair

Replacing your roof isn't just about shingles. We install ice and water shield in the valleys and along eaves, synthetic underlayment across the whole deck, new drip edge on rake and eave, starter strip, and ridge vent. That's how a roof lasts 30 years in Nebraska.

Leak repairs in Mills start at $350 for a simple fix. We find the source with a water test or thermal scan, repair the damage, and warranty the work. If the repair costs more than 30% of a replacement, we'll tell you.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Mills inspector does a full 27-point inspection, free of charge.

Atlas Pinnacle Pristine shingles with Scotchgard algae protection. Ideal for Nebraska humidity. We also install Tamko Heritage laminated shingles for budget-conscious builds and Malarkey Vista AR with Flexor SBS polymer-modified asphalt for high-wind zones. Your installer should match your material choice to your climate, not just your budget.

Thinking about metal roofing for your Mills home? Good choice. We'll walk you through standing seam vs exposed fastener, steel vs aluminum, and color options. Free estimate, no hard sell.

Asphalt shingle roofing is the most common and cost-effective roofing system in Mills. Our crews install 15-20 shingle roofs a month. We know the product inside and out. Nailing patterns, exposure measurements, hip and ridge details.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Mills areas.

Our Mills commercial crews handle everything from small retail strip centers to 50,000 sq ft warehouses. TPO, EPDM, modified bitumen, metal. We're certified installers for all major commercial membrane systems.

Gutter replacement in Mills runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

Our Mills roof inspections cover shingles, flashing, pipe boots, ridge vent, soffit, gutters, and decking condition. You get a written report with photos. If nothing's wrong, we tell you that.

Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Mills contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.

Vented skylights open to let hot air escape. Great for kitchens and bathrooms in Mills. Fixed skylights are cheaper and simpler. Solar-powered options from VELUX qualify for the federal 30% tax credit through 2032.