Local Parkhill Roofing Contractor. GAF Certified

We don't do shortcuts on replacements. Tear off the old roof, check the decking for soft spots, install synthetic underlayment, drip edge, starter strip, shingles, ridge vent. The whole system. Your roof is only as good as the layers underneath.

Missing shingles cause water intrusion through the exposed underlayment and decking. We don't just replace the missing shingle. We check the deck for moisture damage with a Protimeter pin meter, replace any compromised underlayment, and weave new CertainTeed Landmark shingles into the existing pattern.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Parkhill inspector does a full 27-point inspection, free of charge.

We price new installs by the roofing square (100 sq ft). Architectural shingles in Parkhill typically run $350-$550 per square installed, depending on the pitch and access. That includes materials, labor, cleanup, and warranty registration.

Standing seam metal roofing with Kynar 500/Hylar 5000 PVDF finish. The coating that keeps color for 40+ years without fading or chalking. We install Sheffield Metals and McElroy Metal panels in 24-gauge Galvalume steel with concealed Z-clips. UL 2218 Class 4 impact resistance. UL 790 Class A fire rating. Wind uplift tested to ASTM E1592. The only roof you'll ever need in Parkhill.

Three-tab shingles are cheaper upfront but they don't hold up like architectural. We recommend them for sheds, detached garages, and rental properties where budget matters more than aesthetics. For your Parkhill home? Go architectural.

A flat roof that's ponding water is a flat roof with a problem. We install tapered insulation systems to create positive drainage to your scuppers or interior drains. No more standing water after rain.

Commercial roofing in Parkhill means dealing with rooftop HVAC units, drains, parapet walls, and penetrations. We work around your equipment and schedule repairs or installs to minimize business disruption.

Gutter replacement in Parkhill runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

Buying a home in Parkhill? Get an independent roof inspection before you close. Home inspectors look at the roof from the ground with binoculars. We get on it. Big difference.

Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Parkhill contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.

VELUX FS fixed skylights and VS vented skylights installed with EDL flashing kits for profile roofing. The flashing integrates with your shingle courses per IRC R903.2 weather protection requirements. We cut the opening, frame the curb with doubled 2x lumber, install the skylight with factory sealant, and weave the flashing into the existing shingle field. Leak-proof when done right. And we do it right in Parkhill.