Local Redwood Falls Roof Installation & Repair. GAF Certified

GAF Timberline HDZ shingles with StrikeZone nailing area for Class 4 impact resistance rated to UL 2218. We install the full GAF Roof System. Cobra ridge vent, FeltBuster synthetic underlayment, Starter Match starter strip, and Seal-A-Ridge caps. That qualifies your Redwood Falls home for the Golden Pledge warranty: 25-year workmanship plus 50-year material.

Step flashing at chimney walls is the number one leak source we see in Redwood Falls. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Redwood Falls inspector does a full 27-point inspection, free of charge.

We price new installs by the roofing square (100 sq ft). Architectural shingles in Redwood Falls typically run $350-$550 per square installed, depending on the pitch and access. That includes materials, labor, cleanup, and warranty registration.

Standing seam metal roofing with Kynar 500/Hylar 5000 PVDF finish. The coating that keeps color for 40+ years without fading or chalking. We install Sheffield Metals and McElroy Metal panels in 24-gauge Galvalume steel with concealed Z-clips. UL 2218 Class 4 impact resistance. UL 790 Class A fire rating. Wind uplift tested to ASTM E1592. The only roof you'll ever need in Redwood Falls.

Asphalt shingle roofing is the most common and cost-effective roofing system in Redwood Falls. Our crews install 15-20 shingle roofs a month. We know the product inside and out. Nailing patterns, exposure measurements, hip and ridge details.

PVC roofing membrane for Redwood Falls restaurants, commercial kitchens, and any rooftop near grease exhaust. PVC resists animal fats and chemical exposure that destroys TPO and EPDM. We install IB Roof Systems and Duro-Last PVC with heat-welded seams and custom-fabricated accessories. Built-up roofing (BUR) with 3-4 plies of fiberglass felt in hot asphalt is still the longest-proven flat roof system with a 30+ year track record in Minnesota.

Modified bitumen (mod-bit) is still the best choice for high-traffic commercial roofs in Redwood Falls. We torch-apply SBS-modified base and cap sheets over properly primed concrete or approved decking. Two-ply mod-bit systems carry 20-year NDL (No Dollar Limit) warranties through GAF, Firestone, or Johns Manville. NRCA member. We follow the manual.

Gutter replacement in Redwood Falls runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

Annual roof inspections catch small problems before they become expensive ones. A cracked pipe boot is a $150 fix. Ignoring it means $3,000 in ceiling and wall water damage. We recommend an inspection every 2-3 years for roofs under 10 years old, and annually after that.

We keep tarps, plywood, and common repair materials on every truck. When you call (877) 586-1316 for an emergency, our crew shows up ready to work. Not ready to give you a sales pitch.

We install, replace, and repair skylights in Redwood Falls homes. Fogged glass, cracked frames, persistent leaks around old skylights. We fix it all. Sometimes replacing a 20-year-old skylight is cheaper than trying to repair it.