Reedsville Area Roofing Contractor | Call (877) 586-1316

A roof replacement in Reedsville typically runs $8,500 to $24,000 depending on the size and pitch. We give you an exact number upfront with a written proposal. No surprises on install day.

Not every problem needs a full replacement. Sometimes it's a blown-off shingle, a cracked pipe boot, or deteriorated valley flashing. We diagnose the actual issue and fix that. We don't upsell you into a new roof you don't need.

After a storm in Reedsville, half the roofers in town show up knocking on doors. Most of them aren't from here. We are. We've been handling storm claims in Reedsville for 18 years. We know the adjusters, we know the process.

A new roof installation starts with getting the specs right. Roof pitch determines your material options. Attic space determines ventilation needs. Local code determines underlayment requirements. We handle all of that before the first shingle goes on.

Thinking about metal roofing for your Reedsville home? Good choice. We'll walk you through standing seam vs exposed fastener, steel vs aluminum, and color options. Free estimate, no hard sell.

Your shingle choice determines your warranty, your curb appeal, and how your roof handles Ohio weather. We'll show you samples, explain the differences, and let you pick what fits your budget. No pressure.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Reedsville areas.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Reedsville commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Improperly sized gutters cause fascia board rot and foundation erosion. We calculate gutter capacity using the rainfall intensity formula: roof square footage x pitch factor x rainfall rate (inches/hr for Reedsville). Standard 5" K-style handles 5,520 sq ft of effective roof area. Bigger roofs or steeper pitches need 6" gutters with 3x4" downspouts. We hang with hidden hangers screwed into rafter tails every 24".

Our Reedsville roof inspections cover shingles, flashing, pipe boots, ridge vent, soffit, gutters, and decking condition. You get a written report with photos. If nothing's wrong, we tell you that.

Tree through the roof at 2 AM? Active leak flooding your kitchen? Call (877) 586-1316. We answer after hours for emergencies. Our Reedsville emergency crew can be on-site within hours.

VELUX FS fixed skylights and VS vented skylights installed with EDL flashing kits for profile roofing. The flashing integrates with your shingle courses per IRC R903.2 weather protection requirements. We cut the opening, frame the curb with doubled 2x lumber, install the skylight with factory sealant, and weave the flashing into the existing shingle field. Leak-proof when done right. And we do it right in Reedsville.