Roper, NC Roofing Contractor. Free Estimates

Full tear-off down to the decking, inspect every board, replace what's rotten, and install a complete roofing system from ice and water shield up. Most residential jobs finished in 1-2 days.

Leak repairs in Roper start at $350 for a simple fix. We find the source with a water test or thermal scan, repair the damage, and warranty the work. If the repair costs more than 30% of a replacement, we'll tell you.

Wind speeds over 60 mph cause shingle tab lift and seal failure. Hail over 1" diameter causes fractures through the shingle mat to the fiberglass reinforcement. Our HAAG-trained inspectors know the difference between cosmetic damage and functional damage. That distinction determines your insurance payout.

Building a new home in Roper? Our crew works directly with your GC or we self-perform. We handle everything from the decking up: underlayment, ventilation design, material installation, and final inspection.

Metal roofing costs more upfront at $12-$22 per sq ft installed in Roper compared to $4-$8 for shingles. But it lasts 2-3x longer and your energy bills drop 15-25%. Math works out over time.

Your shingle choice determines your warranty, your curb appeal, and how your roof handles North Carolina weather. We'll show you samples, explain the differences, and let you pick what fits your budget. No pressure.

PVC roofing membrane for Roper restaurants, commercial kitchens, and any rooftop near grease exhaust. PVC resists animal fats and chemical exposure that destroys TPO and EPDM. We install IB Roof Systems and Duro-Last PVC with heat-welded seams and custom-fabricated accessories. Built-up roofing (BUR) with 3-4 plies of fiberglass felt in hot asphalt is still the longest-proven flat roof system with a 30+ year track record in North Carolina.

Your commercial roof is protecting your inventory, your equipment, and your employees. We do annual inspections for Roper business owners. Catch small problems before they become $50,000 problems.

Gutter replacement in Roper runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

We climb up, walk the entire roof, and document what we find with photos and measurements. Takes about 30 minutes. You see exactly what we see. No mysteries, no scare tactics.

Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Roper contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.

VELUX FS fixed skylights and VS vented skylights installed with EDL flashing kits for profile roofing. The flashing integrates with your shingle courses per IRC R903.2 weather protection requirements. We cut the opening, frame the curb with doubled 2x lumber, install the skylight with factory sealant, and weave the flashing into the existing shingle field. Leak-proof when done right. And we do it right in Roper.