Sabinsville Roof Repair & Replacement | 19+ Years

We don't do shortcuts on replacements. Tear off the old roof, check the decking for soft spots, install synthetic underlayment, drip edge, starter strip, shingles, ridge vent. The whole system. Your roof is only as good as the layers underneath.

We repair every type of roofing. Asphalt shingles, metal panels, flat membranes, tile. Our guys carry the materials on the truck. Most repairs are same-day once we're on site.

We work with every major insurance carrier. State Farm, Allstate, USAA, Liberty Mutual, Farmers, Nationwide. Our supplement team knows Xactimate line items and fights for full replacement when your roof qualifies.

We install new roofs on new construction, room additions, detached garages, and covered patios. Our Sabinsville crews handle residential and light commercial. Standard install time is 1-3 days depending on size.

Corrugated metal and R-panel are cost-effective options for barns, detached shops, and covered patios in Sabinsville. We install 29-gauge and 26-gauge corrugated with exposed fasteners using neoprene washer screws. For homes, we recommend 24-gauge standing seam with concealed fasteners. Cleaner look, no exposed fastener maintenance. DaVinci composite shake and slate profiles give you the metal longevity with a traditional Pennsylvania aesthetic.

Your shingle choice determines your warranty, your curb appeal, and how your roof handles Pennsylvania weather. We'll show you samples, explain the differences, and let you pick what fits your budget. No pressure.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Sabinsville areas.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Sabinsville commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Gutter replacement in Sabinsville runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

Infrared moisture scanning available for Sabinsville commercial and flat roof inspections. Thermal imaging locates trapped moisture in the insulation layer without cutting core samples. We use Flir E8 cameras to map wet areas, then core sample only the suspect zones to confirm. Saves time, reduces disruption, and gives you a precise repair scope instead of a guess.

Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Sabinsville contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.

Skylight installation costs $1,200-$3,500 in Sabinsville depending on size, type, and roof pitch. That includes the unit, flashing kit, interior trim, and roof patch-in. We handle everything from the outside in.