Trusted Sarepta Roofing Contractor

GAF Timberline HDZ shingles with StrikeZone nailing area for Class 4 impact resistance rated to UL 2218. We install the full GAF Roof System. Cobra ridge vent, FeltBuster synthetic underlayment, Starter Match starter strip, and Seal-A-Ridge caps. That qualifies your Sarepta home for the Golden Pledge warranty: 25-year workmanship plus 50-year material.

Missing shingles cause water intrusion through the exposed underlayment and decking. We don't just replace the missing shingle. We check the deck for moisture damage with a Protimeter pin meter, replace any compromised underlayment, and weave new CertainTeed Landmark shingles into the existing pattern.

Wind speeds over 60 mph cause shingle tab lift and seal failure. Hail over 1" diameter causes fractures through the shingle mat to the fiberglass reinforcement. Our HAAG-trained inspectors know the difference between cosmetic damage and functional damage. That distinction determines your insurance payout.

We install new roofs on new construction, room additions, detached garages, and covered patios. Our Sarepta crews handle residential and light commercial. Standard install time is 1-3 days depending on size.

Standing seam metal roofing with Kynar 500/Hylar 5000 PVDF finish. The coating that keeps color for 40+ years without fading or chalking. We install Sheffield Metals and McElroy Metal panels in 24-gauge Galvalume steel with concealed Z-clips. UL 2218 Class 4 impact resistance. UL 790 Class A fire rating. Wind uplift tested to ASTM E1592. The only roof you'll ever need in Sarepta.

Asphalt shingle roofing is the most common and cost-effective roofing system in Sarepta. Our crews install 15-20 shingle roofs a month. We know the product inside and out. Nailing patterns, exposure measurements, hip and ridge details.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Sarepta areas.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Sarepta commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

If your gutters overflow during rain, they're either clogged, undersized, or pitched wrong. Sometimes all three. We'll assess the issue and fix it. Might be a cleaning, might be a replacement.

Infrared moisture scanning available for Sarepta commercial and flat roof inspections. Thermal imaging locates trapped moisture in the insulation layer without cutting core samples. We use Flir E8 cameras to map wet areas, then core sample only the suspect zones to confirm. Saves time, reduces disruption, and gives you a precise repair scope instead of a guess.

After we tarp and secure your roof, we document everything for insurance purposes. Photos, measurements, damage descriptions. Your adjuster gets a professional report, not a handwritten note.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.