Trusted Searchlight Roofing Contractor. Licensed & Insured

Owens Corning Duration shingles with SureNail technology rated to ASTM D3462 and D7158 Class H wind resistance. Our Searchlight crews install TruDefinition Duration in a full Owens Corning system. ProArmor synthetic underlayment, VentSure ridge vent, and Starter+ starter strip. Preferred Protection warranty included.

Step flashing at chimney walls is the number one leak source we see in Searchlight. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Our storm damage process: free inspection, full photo documentation, direct filing with your insurance carrier, meet the adjuster on-site, and handle the repairs once approved. We don't ask for money upfront on insurance claims.

New construction or an addition? We install new roofing systems from scratch. Decking inspection, ice and water shield, synthetic underlayment, ventilation calculations, and whatever material you want on top. Shingles, metal, or flat.

Metal roofing costs more upfront at $12-$22 per sq ft installed in Searchlight compared to $4-$8 for shingles. But it lasts 2-3x longer and your energy bills drop 15-25%. Math works out over time.

Designer shingles like GAF Camelot and Owens Corning Berkshire mimic slate and cedar shake. Higher cost than standard architectural, but the look is incredible. We install all designer profiles in Searchlight.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Searchlight areas.

TPO is our most-requested commercial membrane in Nevada. Reflective, energy-efficient, and it welds together at the seams for a watertight bond. We install 60-mil and 80-mil systems with 15-20 year manufacturer warranties.

Gutter replacement in Searchlight runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

Infrared moisture scanning available for Searchlight commercial and flat roof inspections. Thermal imaging locates trapped moisture in the insulation layer without cutting core samples. We use Flir E8 cameras to map wet areas, then core sample only the suspect zones to confirm. Saves time, reduces disruption, and gives you a precise repair scope instead of a guess.

Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Searchlight contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.

VELUX FS fixed skylights and VS vented skylights installed with EDL flashing kits for profile roofing. The flashing integrates with your shingle courses per IRC R903.2 weather protection requirements. We cut the opening, frame the curb with doubled 2x lumber, install the skylight with factory sealant, and weave the flashing into the existing shingle field. Leak-proof when done right. And we do it right in Searchlight.