Trusted Semora Roof Installation & Repair. GAF Certified

Replacing your roof isn't just about shingles. We install ice and water shield in the valleys and along eaves, synthetic underlayment across the whole deck, new drip edge on rake and eave, starter strip, and ridge vent. That's how a roof lasts 30 years in North Carolina.

After we fix your roof, we send you before-and-after photos and a written warranty. If it leaks again from the same spot within 5 years, we come back free. That's the deal.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Semora inspector does a full 27-point inspection, free of charge.

We price new installs by the roofing square (100 sq ft). Architectural shingles in Semora typically run $350-$550 per square installed, depending on the pitch and access. That includes materials, labor, cleanup, and warranty registration.

Corrugated metal and R-panel are cost-effective options for barns, detached shops, and covered patios in Semora. We install 29-gauge and 26-gauge corrugated with exposed fasteners using neoprene washer screws. For homes, we recommend 24-gauge standing seam with concealed fasteners. Cleaner look, no exposed fastener maintenance. DaVinci composite shake and slate profiles give you the metal longevity with a traditional North Carolina aesthetic.

Three-tab shingles are cheaper upfront but they don't hold up like architectural. We recommend them for sheds, detached garages, and rental properties where budget matters more than aesthetics. For your Semora home? Go architectural.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Semora areas.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Semora commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Improperly sized gutters cause fascia board rot and foundation erosion. We calculate gutter capacity using the rainfall intensity formula: roof square footage x pitch factor x rainfall rate (inches/hr for Semora). Standard 5" K-style handles 5,520 sq ft of effective roof area. Bigger roofs or steeper pitches need 6" gutters with 3x4" downspouts. We hang with hidden hangers screwed into rafter tails every 24".

Our Semora roof inspections cover shingles, flashing, pipe boots, ridge vent, soffit, gutters, and decking condition. You get a written report with photos. If nothing's wrong, we tell you that.

Emergency tarping is the first priority. We cover the exposed area to stop water entry, then schedule the permanent repair once conditions allow. We don't charge extra for emergency tarp jobs. It's part of the repair cost.

Skylight installation costs $1,200-$3,500 in Semora depending on size, type, and roof pitch. That includes the unit, flashing kit, interior trim, and roof patch-in. We handle everything from the outside in.