Severn Area Roofing Experts | Call (877) 586-1316

We don't do shortcuts on replacements. Tear off the old roof, check the decking for soft spots, install synthetic underlayment, drip edge, starter strip, shingles, ridge vent. The whole system. Your roof is only as good as the layers underneath.

Step flashing at chimney walls is the number one leak source we see in Severn. Improper step flashing causes roof leaks. It's that simple. We install new step flashing with a chimney cricket for proper water diversion, sealed with Geocel tripolymer sealant. Fix it once, fix it right.

Hail, wind, fallen branches. Maryland storms do real damage to roofs. We respond within 24 hours, tarp exposed areas to prevent further damage, and start your insurance claim with a detailed inspection report.

New roof installation on new construction means getting the ventilation right from the start. We calculate intake and exhaust requirements based on attic square footage and install the right combination of soffit vents and ridge vent. Saves you money on cooling bills in Maryland.

Thinking about metal roofing for your Severn home? Good choice. We'll walk you through standing seam vs exposed fastener, steel vs aluminum, and color options. Free estimate, no hard sell.

Three-tab shingles are cheaper upfront but they don't hold up like architectural. We recommend them for sheds, detached garages, and rental properties where budget matters more than aesthetics. For your Severn home? Go architectural.

Modified bitumen is our go-to for residential flat roofs in Severn. Two-ply torch-applied system with a granulated cap sheet. It handles foot traffic, thermal cycling, and Maryland UV better than single-ply at the residential scale.

TPO is our most-requested commercial membrane in Maryland. Reflective, energy-efficient, and it welds together at the seams for a watertight bond. We install 60-mil and 80-mil systems with 15-20 year manufacturer warranties.

Half-round copper gutters with round downspouts. That's the premium install. We solder joints on-site using 50/50 tin-lead solder. Copper develops a natural patina in Maryland's climate within 5-7 years. For aluminum, we use Spectra Metals .027 gauge seamless with Raytec hidden hangers rated to hold 25 lbs per linear foot of ice and debris load.

Infrared moisture scanning available for Severn commercial and flat roof inspections. Thermal imaging locates trapped moisture in the insulation layer without cutting core samples. We use Flir E8 cameras to map wet areas, then core sample only the suspect zones to confirm. Saves time, reduces disruption, and gives you a precise repair scope instead of a guess.

Fallen tree limb damage requires structural assessment before repair. We check rafter integrity, decking condition, and whether the ceiling joists below were impacted. If structural members are cracked or displaced, you need a framing carpenter before we re-roof. We coordinate with trusted Severn contractors for structural work. Insurance carriers require separate line items for structural vs. roofing repairs. We document both.

VELUX FS fixed skylights and VS vented skylights installed with EDL flashing kits for profile roofing. The flashing integrates with your shingle courses per IRC R903.2 weather protection requirements. We cut the opening, frame the curb with doubled 2x lumber, install the skylight with factory sealant, and weave the flashing into the existing shingle field. Leak-proof when done right. And we do it right in Severn.