Shelburne Falls Area Roofing Contractor. Licensed & Insured

GAF Timberline HDZ shingles with StrikeZone nailing area for Class 4 impact resistance rated to UL 2218. We install the full GAF Roof System. Cobra ridge vent, FeltBuster synthetic underlayment, Starter Match starter strip, and Seal-A-Ridge caps. That qualifies your Shelburne Falls home for the Golden Pledge warranty: 25-year workmanship plus 50-year material.

Missing shingles cause water intrusion through the exposed underlayment and decking. We don't just replace the missing shingle. We check the deck for moisture damage with a Protimeter pin meter, replace any compromised underlayment, and weave new CertainTeed Landmark shingles into the existing pattern.

We work with every major insurance carrier. State Farm, Allstate, USAA, Liberty Mutual, Farmers, Nationwide. Our supplement team knows Xactimate line items and fights for full replacement when your roof qualifies.

A new roof installation starts with getting the specs right. Roof pitch determines your material options. Attic space determines ventilation needs. Local code determines underlayment requirements. We handle all of that before the first shingle goes on.

Metal roofing costs more upfront at $12-$22 per sq ft installed in Shelburne Falls compared to $4-$8 for shingles. But it lasts 2-3x longer and your energy bills drop 15-25%. Math works out over time.

GAF Timberline HDZ architectural shingles with StrikeZone nailing area. The highest-selling shingle in North America. Impact-rated to UL 2218 Class 4 when installed with the full GAF Roof System. Our Shelburne Falls crews install Timberline in the full system configuration to qualify for Golden Pledge warranty. ASTM D3462 and D7158 Class H certified.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Shelburne Falls areas.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Shelburne Falls commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Gutter replacement in Shelburne Falls runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

Annual roof inspections catch small problems before they become expensive ones. A cracked pipe boot is a $150 fix. Ignoring it means $3,000 in ceiling and wall water damage. We recommend an inspection every 2-3 years for roofs under 10 years old, and annually after that.

Emergency tarping is the first priority. We cover the exposed area to stop water entry, then schedule the permanent repair once conditions allow. We don't charge extra for emergency tarp jobs. It's part of the repair cost.

Skylight replacement is often better than repair on units over 15 years old. VELUX FCM curb-mount replacement skylights install on the existing curb frame. No structural modification needed. Low-E laminated glass with argon fill for energy efficiency. Solar-powered blinds available for light control. VELUX No Leak guarantee when installed with the complete flashing system. Your Shelburne Falls home gets more light, better insulation, and a proper warranty.