Southington Area Roof Repair & Replacement. GAF Certified

Full tear-off down to the decking, inspect every board, replace what's rotten, and install a complete roofing system from ice and water shield up. Most residential jobs finished in 1-2 days.

Not every problem needs a full replacement. Sometimes it's a blown-off shingle, a cracked pipe boot, or deteriorated valley flashing. We diagnose the actual issue and fix that. We don't upsell you into a new roof you don't need.

After a storm in Southington, half the roofers in town show up knocking on doors. Most of them aren't from here. We are. We've been handling storm claims in Southington for 20 years. We know the adjusters, we know the process.

New construction or an addition? We install new roofing systems from scratch. Decking inspection, ice and water shield, synthetic underlayment, ventilation calculations, and whatever material you want on top. Shingles, metal, or flat.

Standing seam metal roofing with Kynar 500/Hylar 5000 PVDF finish. The coating that keeps color for 40+ years without fading or chalking. We install Sheffield Metals and McElroy Metal panels in 24-gauge Galvalume steel with concealed Z-clips. UL 2218 Class 4 impact resistance. UL 790 Class A fire rating. Wind uplift tested to ASTM E1592. The only roof you'll ever need in Southington.

Your shingle choice determines your warranty, your curb appeal, and how your roof handles Connecticut weather. We'll show you samples, explain the differences, and let you pick what fits your budget. No pressure.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Southington areas.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Southington commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Gutter replacement in Southington runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

We climb up, walk the entire roof, and document what we find with photos and measurements. Takes about 30 minutes. You see exactly what we see. No mysteries, no scare tactics.

Storm damage, fallen trees, sudden leaks. We handle all roofing emergencies in Southington. First we stop the water, then we fix the cause. Emergency response available 7 days a week.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.