Studio City, CA Roofing Contractor. Licensed & Insured

Full tear-off down to the decking, inspect every board, replace what's rotten, and install a complete roofing system from ice and water shield up. Most residential jobs finished in 1-2 days.

Not every problem needs a full replacement. Sometimes it's a blown-off shingle, a cracked pipe boot, or deteriorated valley flashing. We diagnose the actual issue and fix that. We don't upsell you into a new roof you don't need.

Wind damage doesn't always look obvious from the ground. Lifted shingles, broken seals, exposed nail heads. You can't see any of that without getting on the roof. Our Studio City inspector does a full 27-point inspection, free of charge.

We price new installs by the roofing square (100 sq ft). Architectural shingles in Studio City typically run $350-$550 per square installed, depending on the pitch and access. That includes materials, labor, cleanup, and warranty registration.

We do metal roof repairs too. Loose panels, failed sealant at transitions, rust spots on older galvanized. Not every metal issue needs a full replacement. Our Studio City crew can usually fix it same-day.

Architectural shingles are what 80% of Studio City homeowners choose. They look better than 3-tab, last longer, and handle wind better. We install GAF Timberline, Owens Corning Duration, and CertainTeed Landmark.

TPO single-ply membrane in 60-mil or 80-mil thickness, hot-air welded seams, fully adhered or mechanically attached over polyiso insulation board. We install per NRCA and manufacturer specifications. Ponding water is the number one cause of flat roof failure. We use tapered ISO insulation to create minimum 1/4" per foot slope to drains. FM 4473 rated systems available for hail-prone Studio City areas.

TPO is our most-requested commercial membrane in California. Reflective, energy-efficient, and it welds together at the seams for a watertight bond. We install 60-mil and 80-mil systems with 15-20 year manufacturer warranties.

Gutter replacement in Studio City runs $8-$15 per linear foot installed, depending on material and story height. That includes hangers every 24 inches, end caps, miters, and outlet drops. We custom-form everything on-site.

Our 27-point roof inspection covers: shingle condition, granule loss, nail pops, lifting tabs, ridge cap integrity, valley flashing, step flashing at walls, drip edge, pipe boot seals, vent function, soffit ventilation, gutter pitch, downspout capacity, fascia condition, decking (from attic if accessible), and visible signs of moisture in the attic. Written report with photos emailed same day.

Tree through the roof at 2 AM? Active leak flooding your kitchen? Call (877) 586-1316. We answer after hours for emergencies. Our Studio City emergency crew can be on-site within hours.

Skylights bring natural light into rooms that don't have it. Bathrooms, hallways, closets. We install VELUX and Fakro fixed and vented skylights with proper flashing kits designed for asphalt shingle roofs.