Local Sutherland Springs Roof Repair & Replacement | 17+ Years

We don't do shortcuts on replacements. Tear off the old roof, check the decking for soft spots, install synthetic underlayment, drip edge, starter strip, shingles, ridge vent. The whole system. Your roof is only as good as the layers underneath.

Missing shingles cause water intrusion through the exposed underlayment and decking. We don't just replace the missing shingle. We check the deck for moisture damage with a Protimeter pin meter, replace any compromised underlayment, and weave new CertainTeed Landmark shingles into the existing pattern.

Hail, wind, fallen branches. Texas storms do real damage to roofs. We respond within 24 hours, tarp exposed areas to prevent further damage, and start your insurance claim with a detailed inspection report.

Building a new home in Sutherland Springs? Our crew works directly with your GC or we self-perform. We handle everything from the decking up: underlayment, ventilation design, material installation, and final inspection.

We do metal roof repairs too. Loose panels, failed sealant at transitions, rust spots on older galvanized. Not every metal issue needs a full replacement. Our Sutherland Springs crew can usually fix it same-day.

Asphalt shingle roofing is the most common and cost-effective roofing system in Sutherland Springs. Our crews install 15-20 shingle roofs a month. We know the product inside and out. Nailing patterns, exposure measurements, hip and ridge details.

Commercial flat roof replacement in Sutherland Springs starts with a core sample to check the existing insulation. If it's waterlogged, everything comes off. If it's dry, we can sometimes overlay. Saves you $2-$4 per square foot.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Sutherland Springs commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

We install 5" and 6" seamless aluminum gutters in Sutherland Springs. Standard homes get 5", high-volume areas and steeper pitches get 6". Downspouts every 30-40 ft of gutter run with splash blocks or underground drains.

Our 27-point roof inspection covers: shingle condition, granule loss, nail pops, lifting tabs, ridge cap integrity, valley flashing, step flashing at walls, drip edge, pipe boot seals, vent function, soffit ventilation, gutter pitch, downspout capacity, fascia condition, decking (from attic if accessible), and visible signs of moisture in the attic. Written report with photos emailed same day.

We keep tarps, plywood, and common repair materials on every truck. When you call (877) 586-1316 for an emergency, our crew shows up ready to work. Not ready to give you a sales pitch.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.