Traver Area Roofing Contractor | Call (877) 586-1316

Replacing your roof isn't just about shingles. We install ice and water shield in the valleys and along eaves, synthetic underlayment across the whole deck, new drip edge on rake and eave, starter strip, and ridge vent. That's how a roof lasts 30 years in California.

Missing shingles cause water intrusion through the exposed underlayment and decking. We don't just replace the missing shingle. We check the deck for moisture damage with a Protimeter pin meter, replace any compromised underlayment, and weave new CertainTeed Landmark shingles into the existing pattern.

Our storm damage process: free inspection, full photo documentation, direct filing with your insurance carrier, meet the adjuster on-site, and handle the repairs once approved. We don't ask for money upfront on insurance claims.

We install new roofs on new construction, room additions, detached garages, and covered patios. Our Traver crews handle residential and light commercial. Standard install time is 1-3 days depending on size.

Metal roofing costs more upfront at $12-$22 per sq ft installed in Traver compared to $4-$8 for shingles. But it lasts 2-3x longer and your energy bills drop 15-25%. Math works out over time.

Your shingle choice determines your warranty, your curb appeal, and how your roof handles California weather. We'll show you samples, explain the differences, and let you pick what fits your budget. No pressure.

Modified bitumen is our go-to for residential flat roofs in Traver. Two-ply torch-applied system with a granulated cap sheet. It handles foot traffic, thermal cycling, and California UV better than single-ply at the residential scale.

Commercial roofing in Traver means dealing with rooftop HVAC units, drains, parapet walls, and penetrations. We work around your equipment and schedule repairs or installs to minimize business disruption.

Improperly sized gutters cause fascia board rot and foundation erosion. We calculate gutter capacity using the rainfall intensity formula: roof square footage x pitch factor x rainfall rate (inches/hr for Traver). Standard 5" K-style handles 5,520 sq ft of effective roof area. Bigger roofs or steeper pitches need 6" gutters with 3x4" downspouts. We hang with hidden hangers screwed into rafter tails every 24".

Infrared moisture scanning available for Traver commercial and flat roof inspections. Thermal imaging locates trapped moisture in the insulation layer without cutting core samples. We use Flir E8 cameras to map wet areas, then core sample only the suspect zones to confirm. Saves time, reduces disruption, and gives you a precise repair scope instead of a guess.

Emergency roof repairs for active water intrusion follow a strict protocol: tarping with reinforced polyethylene sheeting secured to the roof deck, interior water extraction guidance, and temporary flashing at penetrations. Our Traver emergency crews carry 20x30 tarps, 2x4 nailer boards, and masonry anchors for various deck types. Permanent repairs are scheduled within 48-72 hours once materials are sourced.

VELUX FS fixed skylights and VS vented skylights installed with EDL flashing kits for profile roofing. The flashing integrates with your shingle courses per IRC R903.2 weather protection requirements. We cut the opening, frame the curb with doubled 2x lumber, install the skylight with factory sealant, and weave the flashing into the existing shingle field. Leak-proof when done right. And we do it right in Traver.