Washington Depot Area Roofing Experts. Free Estimates

Full tear-off down to the decking, inspect every board, replace what's rotten, and install a complete roofing system from ice and water shield up. Most residential jobs finished in 1-2 days.

Roof repairs get worse when you ignore them. A $400 flashing repair turns into $4,000 of water damage inside the wall. Our Washington Depot crew can usually get there within 48 hours for non-emergency repairs.

HAAG Certified Inspector on every storm claim we handle in Washington Depot. HAAG certification is the insurance industry standard for forensic roof inspection. Adjusters trust our reports. We document hail hits per square, wind creasing, and granule displacement. FM 4473 hail resistance ratings determine whether your roof qualifies for full replacement or spot repair.

New construction roof installation following IRC Section R905 and local Washington Depot building code amendments. We calculate ventilation per IRC R806 (1:150 ratio reduced to 1:300 when 50% is within 3ft of ridge. Synthetic underlayment per ASTM D226, ice barrier per ASTM D1970 at eaves in freeze-thaw climate zones. Manufacturer-certified installation locks in the full system warranty.

Thinking about metal roofing for your Washington Depot home? Good choice. We'll walk you through standing seam vs exposed fastener, steel vs aluminum, and color options. Free estimate, no hard sell.

Owens Corning Duration STORM shingles with triple-layer SureNail reinforcement strip. Rated to 130 mph wind per ASTM D7158. Algae-resistant granules prevent black streaking in humid Connecticut climates. We install Duration in the full Owens Corning system for Preferred Protection or Platinum Protection warranty coverage. CertainTeed Landmark PRO with NailTrak technology is our alternative pick for Washington Depot homeowners who want the max warranty tier.

Commercial flat roof replacement in Washington Depot starts with a core sample to check the existing insulation. If it's waterlogged, everything comes off. If it's dry, we can sometimes overlay. Saves you $2-$4 per square foot.

We install Carlisle SynTec TPO and EPDM membrane systems with full Carlisle manufacturer warranties. Our Washington Depot commercial roofing crews are factory-trained and authorized. TPO seams are hot-air welded at 900+ degrees. The weld is stronger than the membrane itself. Ponding water? We install tapered ISO insulation to create positive drainage per NRCA guidelines.

Half-round copper gutters with round downspouts. That's the premium install. We solder joints on-site using 50/50 tin-lead solder. Copper develops a natural patina in Connecticut's climate within 5-7 years. For aluminum, we use Spectra Metals .027 gauge seamless with Raytec hidden hangers rated to hold 25 lbs per linear foot of ice and debris load.

Infrared moisture scanning available for Washington Depot commercial and flat roof inspections. Thermal imaging locates trapped moisture in the insulation layer without cutting core samples. We use Flir E8 cameras to map wet areas, then core sample only the suspect zones to confirm. Saves time, reduces disruption, and gives you a precise repair scope instead of a guess.

Storm damage, fallen trees, sudden leaks. We handle all roofing emergencies in Washington Depot. First we stop the water, then we fix the cause. Emergency response available 7 days a week.

A skylight installed wrong will leak. The flashing has to integrate with the shingle courses. Step flashing on the sides, headwall flashing on top, and a sill pan underneath. We use manufacturer flashing kits because they're engineered to work with the skylight frame.